Rustic Radiance Lantern Assembly

Thank you for purchasing a Rustic Radiance Lantern (formerly LoneStar Lantern)!

Assembly is very simple and easy to complete.

Note: The laser-cut joints were designed to be friction fit to provide a tight connection during use allowing it to be disassembled later if desired. Due to this, the joints might be a bit tight. A small hammer may be handy to delicately tap the tabs into the slots.  If desired, wood glue can be used to ensure a more permanent bond but should not be necessary.

BOTTOM: Lay the piece labeled "BOTTOM" with the text and logo facing down with the two open slots in front and the tab facing towards the back.

BACK: Slide the slot of the lantern BACK (the only piece not labeled) over the tab of the BOTTOM piece.

INNER LEFT: Slide the tab of the INNER LEFT side into the left slot of the BOTTOM piece. The text "INNER LEFT" should be facing inside. Tap the two slots of the INNER LEFT piece into the two slots of the BACK piece.

INNER RIGHT: Slide the tab of the INNER RIGHT side into the right slot of the BOTTOM piece. The text "INNER RIGHT" should be facing inside. Tap the two slots of the INNER RIGHT piece into the two slots of the BACK piece.

TOP: Tap the tab of the TOP piece into the slot of the BACK piece. The text "INNER TOP" should be facing inside. Slide the 2 slots of the TOP piece over the tabs of the INNER LEFT and INNER RIGHT pieces.

Before attaching the INNER FACE, be sure all tab connections are secure and tight. 

INNER FACE: Lay the lantern on its back and lightly tap all tabs of the INNER FACE into the corresponding slots of the INNER LEFT, INNER RIGHT, and INNER TOP pieces. The 2 small tabs on top of the INNER FACE should rest on the top. This makes the slot for the FACE to slide into.

After complete, again check all connections are secure and tight.

     

    Assembly of your Rustic Radiance Lantern is complete!

    TO USE: Turn on votive candle and place inside lantern. Slide your desired Lantern Face into the slot and ensure the two tabs fit into the tabs on the BOTTOM.

    Enjoy!

    (Pictures and Short Video to be added soon)